Beamz Atlas LED Double Derby DMX 6x3W Instruction Manual page 7

Auto mode.
Turn dipswitch 8 and 10 to "On" and the device will be in auto mode.
For different auto modes refer to below overview.
Dipswitch "On" Function
10+8 Auto
10+8+1 R shade
10+8+2 G shade
10+8+3 B shade
10+8+4 RGB
10+8+6 RGB Shade
10+8+3+2+1 R+G+B shade
Sound control mode
Turn dipswitch 10 and 7 to "On" and the device will be in auto mode.
For different modes of sound control refer to below overview.
Dipswitch "On" Function
10+7 Sound mode 1
10+7+1 Sound mode 2
10+7+2 Sound mode 3
10+7+3 Sound mode 4
10+7+4 Sound mode 5
10+7+5 Sound mode 6
Master/Slave mode
To set the master unit, turn dipswitch 10 to "On". Turn all dipswitches to "Off" for slave mode (this is also channel 1 in DMX
mode).
In master/slave mode the auto modes and sound control modes can be used (see for dipswitch setting of the master unit
the dipswitch settings in "auto mode" or "sound control mode").
Other modes are:
Dipswitch Function
10+1 Red
10+2 Green
10+3 Blue
10+2+1 Red + Green
10+3+1 Red + Blue
10+3+2 Green + Blue
10+3+2+1 Red + Green + Blue
10+9 RGB change each other
10+9+1 Red strobe
10+9+2 Green strobe
10+9+3 Blue strobe
10+9+4 Red + Green strobe
10+9+5 Red + Blue strobe
10+9+6 Green + Blue strobe
10+9+2+1 R+G+B strobe (speed adjustment) Dip3 - Dip7 adjust strobe speed
Remark
Auto running show
Slow
Fast
Remark
Fixed color (away brightness)
Strobe