Pc With Wi-Fi Adapter - D-Link DIR-300NRU Quick Installation Manual

DIR-300NRU

PC with Wi-Fi Adapter

1. Attach the antenna from the delivery package. To do this, remove the
antenna from its wrapper, attach it to the relevant connector on the back
panel of the router, and then screw the antenna in a clockwise direction to
the back panel. Position the antenna upward at its connecting joint. This
will ensure optimal operation of your wireless network.
2. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
3. Turn on your PC and wait until your operating system is completely
loaded.
4. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in
wireless NICs are equipped with a button or switch that turns on/off the
wireless adapter (refer to your PC documents). If your PC is equipped
with a pluggable wireless NIC, install the software provided with your
Wi-Fi adapter.
Now you should configure your Wi-Fi adapter.
Quick Installation Guide
9