• Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. KA2 Manual_V2.indd 2 1/17/13 11:50 AM...
Page 3
Congratulations on your purchase of the KAT ka2 This ka2 Amplifier was built from the ground up to offer world-class tone, useful features and reliable performance. Inside this manual, you’ll find valuable information about the amp’s controls and specifications. Being familiar with its features will help you effectively tailor your drum amp’s sound.
OBJECTS FILLED WITH LIQUIDS, SUCH 18. Protective Ground Terminal: The apparatus shall be AS VASES, SHALL BE PLACED ON THE connected to an AC main socket with a protective earth APPARATUS. ground connection. KA2 Manual_V2.indd 4 1/17/13 11:50 AM...
Page 5
êlectrique. Il est conseillê de garder cette prise facilement accessible. 18. Borne de terre de protection: L'appareil doit être connecté à un connecteur AC principale avec un raccordement à la terre de protection. KA2 Manual_V2.indd 5 1/17/13 11:50 AM...
This controls the volume level of the drum inputs to the power amplifier. Aux Volume: This controls the volume level of the Aux Input. Equalization Section: These control the overall tone of the ka2 Drum Amplifier. Low: This controls frequencies centered at 60Hz with a +/-12 dB sweep. Mid: This controls frequencies centered at 800Hz with a +/-12 dB sweep.
The Ground Lift switch disconnects pin 1 of the XLR Line Out jack to eliminate a “ground loop” hum. A ground loop can exist when the ka2 and the device it is plugged into are connected to grounded outlets that are in physically different locations and/or on different circuits and should only be used if there is an audible hum.