Related Manuals for SAFARI Montage WAN–1212
Summary of Contents for SAFARI Montage WAN–1212
- Page 1 Visual Learning Served On Demand ™ WAN–1212 / RM–86X Rack-Mount Server Installation Guide...
- Page 2 Thank you for choosing the SAFARI Montage Video-On-Demand and Digital Media Management system. In just a few steps, you’ll have access to fully segmented programs from the finest educational publishers – from anywhere on your network. This setup guide covers the following SAFARI Montage server models: WAN-1212...
- Page 3 Unpacking the Hardware Step 1 Carefully remove the SAFARI Montage server and the following items from the box, and place them on a flat surface. If you are missing any of the items below, please call 1.800.843.4549. Power Cord Keys (2)
- Page 4 Connecting Your SAFARI Montage Server Step 3 a. Using the image below as a guide, first connect the server to the network by plugging an Ethernet cable into any active Ethernet port on your network. b. Connect a monitor and keyboard to the server.
- Page 5 Networking Your SAFARI Montage Server Step 5 Access the SAFARI Montage console via the monitor and keyboard that you connected in Step 3. 1. Choose Option 1, “Networks Settings...” 2. Choose Option 2, Network Cards (IP Address)...
- Page 6 3. If you chose option 2, enter the appropriate network settings for this device. If you are assigning SAFARI Montage a static IP, that IP must not be in use by any other device on your network. You must also ensure that SAFARI Montage has valid DNS...
- Page 7 Launch a web browser (e.g., Internet Explorer) from any workstation on your network. Enter the URL for your SAFARI Montage server into the address bar, and hit ”enter” (or ”return” if you are using a Mac). Obtain this URL from your Network Administrator if necessary.
- Page 8 800.782.7230. When calling, please have your server’s serial number available. Your serial number can be found in the Help > About section of the SAFARI Montage application and on the back of your server.
Need help?
Do you have a question about the WAN–1212 and is the answer not in the manual?
Questions and answers