Advertisement
Table of Contents
- 1 Step 1 – Unpack Hardware
- 2 Step 2 – Install the SAFARI Montage Server
- 3 Step 3 – Connect the SAFARI Montage Server
- 4 Step 4 – Power on the SAFARI Montage Server
- 5 Step 5 – Configure Network Settings
- 6 Step 6 – Access the SAFARI Montage User Interface
- 7 Troubleshooting
- 8 Additional Content
- Download this manual
Server Installation Guide
WAN-1216X | WAN-1212X | RM-128X | RM-126X
Welcome to SAFARI Montage!
Thank you for choosing the SAFARI Montage. In just a few steps, you'll have access to your school or
district's SAFARI Montage solutions – from anywhere on your network.
This setup guide covers the following SAFARI Montage server models:
WAN-1216X, WAN-1212X, RM-128X, RM-126X
081716
Advertisement
Table of Contents
Related Manuals for SAFARI Montage WAN-1216X
Summary of Contents for SAFARI Montage WAN-1216X
- Page 1 WAN-1216X | WAN-1212X | RM-128X | RM-126X Welcome to SAFARI Montage! Thank you for choosing the SAFARI Montage. In just a few steps, you’ll have access to your school or district’s SAFARI Montage solutions – from anywhere on your network. This setup guide covers the following SAFARI Montage server models:...
- Page 2 Step 1 – Unpack Hardware Carefully remove the SAFARI Montage server and the following items from the box and place them on a flat surface. If you are missing any of the items below, please call 1-800-843-4549. Power Cord (2 for WAN) Keys (2)
- Page 3 Once all cables have been connected, turn on the server by pressing the power button located on the front of the server. Power Once the server’s boot sequence has completed, the SAFARI Montage console menu will appear. ©2016 SAFARI Montage All Rights Reserved...
- Page 4 Step 5 – Configure Network Settings Access the SAFARI Montage console via the monitor and keyboard connected in Step 3 to confirm or configure the server network settings. 1. Choose Option 1, “Network Settings…” 2. Choose Option 2, “Network Cards (IP Address)…” 3. Choose the option number associated with the connected network card (NIC) you wish to configure.
- Page 5 Step 6 – Access the SAFARI Montage User Interface Launch a web browser and enter the URL for your SAFARI Montage server into the address bar. Obtain this UTL from your Network Administrator if necessary. Log in as Administrator by using the default administrative account, and click on “Log in”:...
-
Page 6: Troubleshooting
Your serial number can be found in the Help > About section of the SAFARI Montage application and on the back of your server. Additional Content If you are interested in purchasing additional SAFARI Montage products or digital content packages, please visit www.SAFARIMontage.com or contact your sales representative.
Need help?
Do you have a question about the WAN-1216X and is the answer not in the manual?
Questions and answers