Makita HR160D Instruction Manual
Hide thumbs Also See for HR160D:


Quick Links

Cordless Rotary Hammer
IMPORTANT: Read Before Using.


Table of Contents

Summary of Contents for Makita HR160D

  • Page 1 INSTRUCTION MANUAL Cordless Rotary Hammer HR160D 004204 IMPORTANT: Read Before Using.
  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model HR160D Concrete 16 mm Capacities Steel 13 mm Wood 20 mm No load speed (min 0 - 950 Blows per minute 0 - 3,600 Overall length 296 mm Net weight 2.5 kg Rated voltage D.C.12 V •...
  • Page 3: General Power Tool Safety Warnings

    Do not use any Makita Corporation responsible adapter plugs with earthed (grounded) power manufacturer declare that the following Makita tools. Unmodified plugs and matching outlets will machine(s): reduce risk of electric shock. Designation of Machine:...
  • Page 4 away from moving parts. Loose clothes, terminal another. Shorting the battery jewellery or long hair can be caught in moving terminals together may cause burns or a fire. parts. 27. Under abusive conditions, liquid may be 16. If devices are provided for the connection of ejected from the battery;...
  • Page 5: Functional Description

    Do not leave the tool running. Operate the tool even a breakdown. only when hand-held. Do not store the tool and battery cartridge in 12. Do not point the tool at any one in the area locations where the temperature may reach or when operating.
  • Page 6 using the tool to prevent the battery cartridge from Selecting the action mode accidentally falling out of the tool. 1. Action mode Switch action changing knob 1. Switch trigger 004212 This tool employs an action mode changing knob. Select one of the three modes suitable for your work needs by 004209 using this knob.
  • Page 7 Bit grease Using cold chisel or bull point Coat the bit shank head beforehand with a small amount 1. Chisel adapter of bit grease (about 0.5 - 1 g). 2. Clamp screw This chuck lubrication assures smooth action and longer 3.
  • Page 8: Operation

    Discoloration, deformation or cracks may control of the tool and potentially severe injury. result. To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts.
  • Page 9 Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. SDS-Plus Carbide-tipped bits • Bull point • Cold chisel •...
  • Page 12 Makita Corporation Anjo, Aichi, Japan 883900E223...

Table of Contents