Remove The C3-Board; Remove The Plasma Panel Section From The Cabinet Assy (Glass); Remove The Glass Holders - Panasonic TC-P65S1 Service Manual

8.21. Remove the C3-Board

1. Remove the Tuner unit. (See section 8.5.)
2. Remove the Support metal (C). (See section 8.16.)
3. Remove the Support metal (L). (See section 8.17.)
4. Remove the Vertical bar-down assy. (See section 8.18.)
5. Remove the flexible cables holder fastening screws (×10
).
6. Disconnect the flexible cables (CB11, CB12, CB13, CB14
and CB15).
7. Disconnect the flexible cables (C31 and C36).
8. Disconnect the connectors (C33 and C35).
9. Remove the screws (×5
8.22. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the cabinet assy and the plasma panel fastening
, ×4
screws (×12
2. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
) and remove the C3-Board.
).

8.23. Remove the Glass holders

1. Remove the Cabinet assy. (See section 8.22.)
2. Unlock the cable clampers to free the cable.
3. Remove the screws (×4
4. Remove the Joint metal top (×4) and the Joint metal bot-
tom (×4).
5. Remove the screws (×4
6. Remove the Glass holder bottom.
7. Remove the screws (×2
8. Remove the Glass holder top.
9. Remove the screws (×8
10. Remove the Glass holders (L, R).
25
, ×4
).
).
).
).