Table of Contents
Advertisement
Quick Links
Models:
50345 — 5", 8,500 RPM
50349 — 7", 6,000 RPM
50360 — 5", 12,000 RPM
Always operate, inspect and maintain this tool in accordance with the Safety Code for portable air tools (ANSI B186.1 and B7.1) and any other applicable
!
WARNING
safety codes and regulations. Please refer to Dynabrade's Warning/Safety Operating Instructions for more complete safety information.
52164 Exhaust Cover
52166 Seal
52167
Felt Silencer
52165 Gasket
50424
Bearing Washer
*Bevel Gear
12152
52159 - 6,000 RPM
Bearing
52099 - 8,500 RPM
52125 - 12,000 RPM
52117 Spindle
52120 Shim Pack
(3) (as req.)
Governor Cage
50431
Bearing
07113 - 6,000 RPM
07124 - 8,500 RPM
52088
12,000 RPM
Spacer
50412
01007 Bearing
Felt Ring
52089
07114 Bearing Plate
Washer
52118
Spindle Nut
52091
Retainer
01673 Pin (2)
95897
Screw (5)
50511 Screw (2)
01791 Washer (2)
52180 Clamp
52168 Silencer
01041 Grease Fitting
Governor Spring 95611 Shim (as req.)
52182 - 6,000 RPM
52126 - 8,500 RPM
12,000 RPM
50938 Governor Pin (2)
Governor Weight (2)
50399 - 6,000 RPM
52086 - 8,500 RPM
12,000 RPM
07118 Cylinder
*Sold as a set only
1.2 HP Right Angle Disc Sander
Air motor and machine parts; with 5/8" male spindle
Housing (Incl. 01041 Fitting)
52112 on 50360
52113 on 50349
52116 on 50345
52169 Handle Assembly
02658 Packing
52090 Adapter
50471 Spring Holder
50470 Pin
50463 Governor Valve
Parts Page Reorder No. PD96•19
07141 Valve Body
(Incl. 07142 Bushing)
01089 Lever
01746 O-Ring
02626 Adj. Bushing
02631 Nut
07136 Grip
07168
Valve Stem Assy.
07107 Blade (5) (5/pkg.)
07119 Bearing Plate
01277 Shim (3/pkg.) (as req.)
01036 Bearing
*Bevel Pinion
52158 - 6,000 RPM
52098 - 8,500 RPM
95939 Ring
52124 - 12,000 RPM
Effective April, 1996
Supersedes PD93•20
07142
01697 Inlet Bushing
Bushing
01017 Pin
07145 Spring
07146 Packing
07147 Plug
07106 Rotor/ Shaft Assembly
50435 Key
See inside for Important
Operating, Maintenance and
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dynabrade 50345
Summary of Contents for Dynabrade 50345
- Page 1 Always operate, inspect and maintain this tool in accordance with the Safety Code for portable air tools (ANSI B186.1 and B7.1) and any other applicable WARNING safety codes and regulations. Please refer to Dynabrade's Warning/Safety Operating Instructions for more complete safety information. 07142 01697 Inlet Bushing Housing (Incl.
- Page 2 Mounting Arrangement *Spacers *Sanding Pad *Sanding Disc *Flange Nut *Spanner Wrench Sand with this surface. *Not included Standard Wrenches 95049 – 3/16" Hex Key 95304 – 24mm Open-End Optional Accessories 96042 Motor Tune-Up Kit: Dynaswivel® Includes assorted parts to help Swivels 360°...
- Page 3 2. Some silencers on air tools may clog with use. Clean and replace as required. 3. All Dynabrade air motors should be lubricated with two drops of Dynabrade Air Lube (P/N 95842: 1pt. 473ml.) placed directly into the air inlet with throttle lever depressed every four hours of use.
- Page 4 Each tool on each drop should also be equipped with a secondary air processing unit. This consists of an in-line Filter-Regulator- Lubricator. All Dynabrade air tools must be used with a Filter-Regulator-Lubricator to maintain all warranties. Our warranty obligation is contingent upon proper use of our tools and cannot apply to equipment which has been subject to misuse such as unclean air, wet air or a lack of lubrication during the use of the tool.
Need help?
Do you have a question about the 50345 and is the answer not in the manual?
Questions and answers