Step 3 - Load The Washer; Step 4 - Start The Washer - Haier GWT560BW User Manual

ADD BlEAcH (if DESirED)
•
Pour measured liquid chlorine bleach into the
liquid bleach dispenser.
noTE: Use only liquid bleach in this dispenser.
IMPoRTanT: Be careful not to spill undiluted
bleach onto the washer cabinet or your
clothes. Since it is a strong chemical, it may
damage clothes or the finish of the washer.
•
Follow manufacturer's directions on garment
label for recommended use of liquid or powder
bleach.
ADD fABric SOftEnEr (if DESirED)
•
Pour measured liquid fabric softener into the
fabric softener dispenser.
•
Use the amount recommended by the fabric
softener manufacturer, but do not fill above
the "Max Fill" line.
•
Fabric Softener is dispensed during the final
rinse.
IMPoRTanT: The Fabric Softener option must
be selected when using this dispenser. Do
not pour fabric softener directly on clothes
because it could create spots or stains.

sTEP 3 - LoaD THE WasHER

1. Load garments loosely and evenly around the wash basket.
2. Do not place clothes directly over the center of the pulsator.
3. Close the washer lid.
noTEs:
•
Do not overload or stuff items into the wash basket.
•
The washer will not pulsate or spin with the lid open.

sTEP 4 - sTaRT THE WasHER

1. Turn the washer on by pressing the POWER BUTTON.
2. Select a wash cycle by turning the CYCLE SELECTION KNOB.
3. Modify the default settings and options if desired.
4. Press the START/PAUSE BUTTON on the face of the knob to start the wash
cycle.
18