Table of Contents
Advertisement
For more information, press
Out leveling.
Audio out delay
If you set an Audio sync delay on your Home Theatre System,
to synchronise the sound with the picture, you must switch off
Audio out delay on the TV.
For more information, press
Out delay.
Audio out offset
If you cannot set a delay on the Home Theatre System, you can
set a delay on the TV with Audio out offset.
For more information, press
Out offset.
Speakers
Home Theatre System
You can send the TV sound to a connected audio device - a
Home Theatre System or audio system.
You can select where you want to hear the TV sound and how
you want to control it.
• If you select Off, you permanently switch off the TV speakers.
• If you select TV speakers, the TV speakers are always on.
With an audio device connected with HDMI CEC, you can use
one of the EasyLink settings.
• If you select EasyLink, the TV sends the TV sound to the
audio device. The TV will switch off the TV speakers when the
device is playing the sound.
• If you select EasyLink autostart, the TV will switch on the
audio device, send the TV sound to the device and switch off
the TV speakers.
With EasyLink or EasyLink autostart selected, you can still switch
to TV speakers if necessary.
To set the TV speakers . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Sound output.
3 - Press (right) and select Off, TV speakers, EasyLink or
EasyLink autostart.
4 - Press , repeatedly if necessary, to close the menu.
To switch to speakers directly . . .
1 - While watching TV, press .
2 - Select Speakers and select TV or Amplifier (audio system).
3 - Press , repeatedly if necessary, to close the menu.
Keywords and look up Audio
Keywords and look up Audio
Keywords and look up Audio
TV placement
As part of the first installation, this setting is set to either On a
TV stand or Wall mounted. If you have changed the placement
of the TV since then, adjust this setting accordingly for best
sound reproduction.
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > TV placement and
press OK.
3 - Select On a TV stand or Wall mounted and press OK.
4 - Press , repeatedly if necessary, to close the menu.
19.4
Universal access
Switch on
With Universal access switched on, the TV is set for use for
hearing and visually impaired people.
Switch on
If you did not switch on Universal access during the installation,
you can still switch it on in Setup.
To switch on Universal access . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Universal access
and press OK.
3 - Select On and press OK.
4 - Press , repeatedly if necessary, to close the menu.
With Universal access switched on in Setup, the Universal
access option is added in the Options menu.
Hearing impaired
Switch on
Digital TV channels can broadcast special audio commentary
describing what is happening on screen.
To be able to set the visually impaired audio and effects, you
have to switch on Audio description first.
Also, before you can switch on Audio description, you have to
switch on Universal access.
Audio description
With Audio description, a narrator's commentary is added to
the normal audio.
To switch on the commentary (if available) . . .
1 - With Universal access switched on, press
OPTIONS and select Universal access.
2 - Select Audio description and press OK.
3 - Select On and press OK.
61
Advertisement
Table of Contents
