Ir Sensor For Non-Rf Remote Control; Batteries; Cleaning - Philips 42PFH5609 User Manual

Table of Contents

Advertisement

4 -  Mute
To mute the sound or to restore it.
5 -  Channel
To switch to the next or previous channel in the channel list.
To open the next or previous page in Text or start the next or
previous chapter on a disc.
6 - TEXT
To open or close Text / Teletext.
6.2
IR sensor for non-RF remote
control
The TV can receive commands from a remote control that uses
IR (infrared) to send commands. If you use such a remote
control, always make sure you point the remote control at the
infrared sensor on the front of the TV.
6.3

Batteries

1 - Slide the battery door in the direction shown by the arrow.
2 - Replace the old batteries with 2 type AAA-R03-1.5V
batteries. Make sure the + and the - ends of the batteries line up
correctly.
3 - Reposition the battery door and slide it back until it clicks.
Remove the batteries if you are not using the remote control for
a long time.
Safely dispose of your old batteries according to the end of use
directions.
For more information, press
use.
Keywords and look up End of
6.4

Cleaning

Your remote control is treated with a scratch-resistant coating.
To clean the remote control, use a soft damp cloth. Never use
substances such as alcohol, chemicals or household cleaners on
the remote control.
24

Advertisement

Table of Contents
loading

This manual is also suitable for:

42pft560947pfh560947pft560955pfh560955pft5609

Table of Contents