Advertisement
Full Bed Shown
1. Left rear corner of bed
10. Loosely mount each set of new rear pivot plates to
right and left bed frame channels with three 3/8 x
3-3/4 inch large capscrews and locknuts (Figure 8).
Position brackets rearward on full bed as shown
in Figure 8, and forward on 2/3 bed as shown in
Figure 9.
Full Bed Shown
1. Left rear corner of bed
2/3 Bed Shown
1. Left rear corner of bed
11. Install bed to vehicle by reversing step 1. Rear of bed
is now secured to rear of hitch assembly (Figure 10).
Figure 7
2. Pivot bracket
Figure 8
2. Pivot bracket
Figure 9
2. Pivot bracket
3
Figure 10
Full Bed Shown
Advertisement
