Panasonic VIERA TH-L32U30M Operating Instructions Manual page 25

Screen Display
• Off
• On
R-Gain
G-Gain
B-Gain
R-Cutoff
G-Cutoff
B-Cutoff
Reset to
Defaults
Gamma
Reset to
Defaults
r
Resolution
Enhancer
• Off
• Mid
• Max
16:9 Overscan
• Off
• On
AV Colour System
• Auto
• PAL
• SECAM
• M.NTSC
• NTSC
Colour Matrix
• SD
• HD
DVI Input Setting
• Normal
• Full
Reset to Defaults

: PC input mode only
1
TH_L32U30KMTX_EN.indd 25 TH_L32U30KMTX_EN.indd 25
Turns the screen off when you select [Off]
The sound is active even if the screen turns off.
●
Press any buttons (except Standby) to turn the screen on.
●
This function is useful in reducing power consumption when listening to
●
the sound without watching the image on the TV.
Adjusts the white balance of bright red area
Adjusts the white balance of bright green area
Adjusts the white balance of bright blue area
Adjusts the white balance of dark red area
Adjusts the white balance of dark green area
Adjusts the white balance of dark blue area
Press the OK button to reset to the default White Balance
Switches the gamma curve
• 1.8 / 2.0 / Please note that the numerical values are only reference for
●
2.2 / 2.4 / 2.6 adjustment.
Press the OK button to reset to the default Gamma
Enhances the resolution to display a sharper image
Not valid when Media Player is in use.
●
[On]: Default - Image is overscanned by ~5% beyond the edge of the
screen to hide edge video noise
[Off]: Displays image in its original size including edge video noise such
as lines, dashes, dots, etc.
Applicable for video signals when the TV aspect is set to [16:9]
●
Memorised separately for SD and HD channels / signals
●
Selects optimum colour system based on video signals in AV mode
Available only with 480p or 576p input on video signals in a natural
colour from digital equipment connected to AV1 component or HDMI1 /
HDMI2 / HDMI3 terminals. Select [SD] or [HD] to adjust suitable colour
parameters for [SD] (standard definition) or [HD] (high definition)
[SD]: Input signal is a normal TV system
●
[HD]: Input signal is a high definition system
●
Changes the black level in the image for HDMI input mode with DVI input
signal manually
● When the DVI input signal from the external equipment, especially from
PC, is displayed, the black level may not be suitable. In this case, select
[Full].
The black level for HDMI input signal will be adjusted automatically.
●
For HDMI input mode with DVI input signal only
●
Press the OK button to reset the present Picture Viewing Mode of the
selected input to the default settings
25
3/21/2011 3:05:58 PM 3/21/2011 3:05:58 PM