Function Of Each Button - LG WF-HV150DD Service Manual

3-3. FUNCTION OF EACH BUTTON

for 1 valve model
BEEPER BUTTON
• Use to select Beeper
Pressing the button allows
HIGH
respectively.
HIGH
• This function is used to reduce the drying
time of the laundry by allowing air to
circulate within the bowl in order to
reduce moisture levels. It does not dry the
clothes completely.
• Air dry selections light up in sequence as follows.
60 90 120 60 as the button is pushed.
• Press the button for 3 seconds to select
and press the Power botton to cancel the
operation. (refer to page 22)
SOIL LEVEL BUTTON
• This button allows you
to select the strength of
the wash action.
• Power option selections
light up in sequence as
follows Normal Heavy
Light Normal as the
button is pushed.
This can be selected for
any program.
• Adjustment can be made
while washing.
NOTE
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by 8minutes at
maximum and decreased by 4 minutes at maximum.
* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically adds
rinsing, and the remaining time may be increased.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to the
washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a liquid
one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.
• Use to select the proper amount of water in
relation to the weight and type of laundry.
• Automatically controlled, but can be selected
OFF LOW
manually by pressing the WATE Button.
• WATER is automatically selected for
FUZZY(normal) program.
The following settings are indicated as the
button is pushed
7 8 9 10 1 2 3 4 5 6 7
AIR DRY
TUB DRY
• Use this when
you want to dry
the empty tub
after a wash.
• This can be
set/canceled by
pressing the Wash
button and Rinse
button
simultaneously.
(refer to page 22)
WATER BUTTON
WASH. RINSE. SPIN BUTTON
• Use when wash, rinse, spin
time need to be adjusted.
• The time increases when the
button is pressed.
• If adjustments are needed
during the wash, press the
[start/pause] button before
making any changes.
• When the button is pressed
during washing, the
remaining time is displayed.
16
TIME LEFT, DELAY START
(RESERVATION), ALARM INDICATION
• Time left - During operation, the remaining
time is indicated.
• DELAY START INDICATION
(RESERVATION) - When DELAY START
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)
• Alarm indication - When an error occurs, an
error message appears to indicate the
abnormality. For example, indicates that
the lid is open.
CHILD LOCK FUNCTION
• Use to lock or unlock the
control buttons to prevent
settings from being
changed by a child.
To lock, push the RINSE
and SPIN buttons
simultaneously and to
unlock push them one
more time during the
washing process.
(refer to page 25)