Advertisement
How to install your grill drawer
545
You will need the following housing
596
area to install your grill drawer correctly.
128
141
The grill drawer is designed to fit into
554
23
a cabinet of 600mm width with a
clearance between the side and rear of
Air Exhaust
25 min
the grill drawer of 5mm or more.
560
The grill drawer should be built in,
but you must ensure that it is properly
ventilated as described below.
560
In the diagram shown in figure 4 an
open channel is shown at the rear
141
of the housing unit for ventilation
purposes; this is standard with most
housing units. The dimensions of
the rear channel should be 500mm x
Air Intake
25mm as a minimum.
fig. 4
The top of the unit should be open to allow air to escape and a free
air intake should be provided in the housing unit to allow a natural
flow of cooling air inside the unit. The dimensions of the air intake are
recommended as 500mm x 25mm (or 1250cm
).
2
The maximum weight of an appliance to be installed above the grill
drawer is 60kg.
12
Advertisement
