INSTALLATION
WARNING!
Refer to "Safety information" chapter.
IMPORTANT
BEFORE INSTALLATION
Before the installation of the appliance, record the
information below from the rating plate. The rating plate is
on the bottom of the appliance casing.
Model
PNC
Serial number
EHI645BB
R 5mm
490
mm
+1
IMPORTANT
If you use a protection box (an additional accessory
front airflow space of 5mm and protective floor directly
below the appliance are not necessary.
You can not use the protection box if you install the
appliance above an oven.
600mm
560+1mm
Built-in appliances
Only use the built-in appliances after you assemble the
appliance into correct built-in units and work surfaces that
align to the standards.
Connection cable
•
Use the correct mains cable of type H05BB-F Tmax
90°C (or higher) for a single phase or two phase
connection.
min.
500mm
min.
50mm
min.
5mm
), the
1
EHI845BB
R 5mm
750
mm
+1
490
mm
+1
min.
20mm
15
600mm
min.
25mm
min.
5mm