Table of Contents
Advertisement
Installation
Important
•
You need the following housing area to fit your oven correctly.
•
The double oven is designed to fit into a cabinet of 600 mm width.
•
The double oven can be built in the kitchen units, but you must ensure that it is properly ventilated.
•
Lift the appliance into position onto the shelf, taking care NOT to lift it by the door handles.
•
Remember the housing should not be free standing but be secured to the wall and/or adjacent fittings.
WARNING
•
We would point out that the adhesive which bonds the plastic laminate to the furniture must withstand
temperatures not less than 150° C to avoid delamination.
•
The appliance must be housed in heat resistant units.
The walls of the units must be capable of resisting temperatures of 75 °C above room temperature.
•
A
overall height* of product
B
overall width of product
C
overall depth of product (excluding handle and knobs)
D
height of chassis
E
width of chassis
F
depth of chassis
depth of oven frame and control panel
G
(=distance between front of chassis and front of oven door, excl. knobs)
I
minimum inside width of cavity
I'
overall width of cavity
J
inside height of cavity
J'
overall height of cavity
K
minimum inside depth of cavity
L
flush fitting cabinetry clearance
* All height measurements include mounted feet.
24
Product and Cabinet Dimensions (mm)
1077
595
567
1057
556
545
22
560
600
1070
1082
550
22
Advertisement
Table of Contents
