Electrolux EHD90230P User Manual page 6

6 electrolux
Step
1.
Select warm-up setting
2. Select the desired heat setting be-
tween 1 and 8
The length of time that the automatic warm
up function operates depends on the heat
setting selected.
Heat setting
Using the child safety device
The child safety device prevents unintention-
al use of the appliance.
Switching on the child safety device
Step
1.
Switch on appliance. Do not set a heat setting.
2.
Touch for 4 seconds
The child safety device is switched on.
Overriding the child safety device
The child safety device can be switched off
in this way for a single cooking session; it re-
mains activated afterwards.
Step
1.
Switch appliance on
2.
Touch
Until the appliance is next switched off, it can used as normal.
After overriding the child safety device, a heat setting or a function must be set within
approx. 10 seconds, otherwise the appliance automatically switches itself off.
Control panel
1
2
3
4
5
6
7
8
9
Control panel
Control panel
for 4 seconds
Display
display flashes
The desired heat setting is displayed.
lights up.
As long as the display is lit, the appliance is
working at full power.
After the automatic warm-up is completed, the
display goes out.
Length of the automatic warm up [min:sec]
lights up. The operational readiness
indicators of the individual cooking
zones light up.
above
display
0:12
0:12
3:07
5:51
10:12
2:01
2:28
2:52
---
Pilot light
lights up
Pilot light
above lights up
above goes out