Fre E Ze R Op Er Ati O N - Beko CCF360W Instructions Manual

FRE E ZE R OP ER ATI O N

Temperature adjustment
The temperature of the freezer is adjusted by means
of the knob assembled on the thermostat, position
„MAX" being the lowest temperature.
The achieved temperatures can vary according to the
conditions of use of the appliance, such as: place of
the appliance, ambient temperature, frequency of lid
opening, extent of filling with food of the freezer. The
position of the thermostat knob will change according
to these factors.
temperature of approx. 22
be adjusted to the mild position.
We recommended that you check the temperature with a thermometer to ensure that the
Freezer is kept to the desired temperature. Remember you must take your reading very
quickly since the thermometer temperature will rise very rapidly after you remove it from
the freezer.
Please remember each time the lid is opened cold air escapes and the internal
temperature rises. Therefore never leave the lid open and ensure it is closed: immediately
after Food is put in or removed.
Indicator lights
The indicator light set is placed on the front side of the freezer for easy visibility.
By using the Thermostat Adjustment Knob (1), you can adjust the internal temperature of
the freezer.
Indicator lights mean the following:
- green LED – shows that the appliance is supplied with electric energy.
- red LED – lights if the temperature in the freezer is too high. The LED will operate 45
minutes after putting into operation of the freezer, then it must go off. If the LED comes
on during the operation, this may mean that a defect has occured.
- orange LED - fast freeze function activated - by setting the knob to Superfreeze position
the orange led goes on, showing that the appliance entered into the "fast freeze" mode.
The exit of this mode is done automatically after 50 hours then the appliance runs in
economic mode, and the orange led goes off.
Normally, for an
0
C, the thermostat should
ambient
6