Advertisement
PAGE HEAdER.....
CARE & CLEANING
Do not leave plastic cooking utensils in
contact with the hot frypan surface while
cooking.
Before cleaning, switch the frypan to the off
position and unplug from the power outlet.
Remove the Temperature Control Probe
when cooled from the probe socket of the
appliance.
TEMPERATURE CONTROL PROBE
If cleaning is necessary, wipe the
Temperature Control Probe over with a
slightly damp cloth. Ensure it is completely
dry before use. Never immerse the
Temperature Control Probe, plug or cord in
water or any other liquid.
NON-STICK COOKING SURFACE
Cooking on a non-stick surface minimises
the need for oil as food does not stick and
cleaning is easier.
Any discolouration that may occur on the
non-stick surface may detract from the
appearance of the frypan but will not affect
the cooking performance.
Do not use metal (or other abrasive)
scourers when cleaning the non-stick
coating. Wash with hot soapy water. Remove
stubborn spots with a soft plastic washing
pad or nylon washing brush. Rinse and dry
thoroughly.
REMOvING dISCOLOURATION OF
THE NON-STICK SURFACE
1.
Combine 2 tablespoons bicarbonate
of soda, ¼ cup household bleach, 1 cup
water.
2.
Pour into the frypan, place lid on with
the vent closed, and simmer for 5-10
minutes.
3.
Clean in a well-ventilated area and
avoid breathing in the vapours. Wash as
directed before re-use. In some instances
this may not remove all the staining.
12
GLASS HIGH dOMEd LId
Wash the lid in warm soapy water using a
soft sponge, rinse and dry thoroughly.
NOTE
Take care when the glass lid is hot. Do
not place hot lid under cold water or on
cold surfaces. This may cause the lid
to break.
dISHWASHER SAFE
The lid and cooking pan are dishwasher
safe for easy cleaning. The recessed heating
element is completely sealed so it is safe to
immerse in water.
The frypan may also be washed in hot, soapy
water. Dry thoroughly.
NOTE
Before inserting the temperature
control probe into the frypan socket,
ensure the interior of the frypan
socket is fully dry. To do this, shake
out excess water then wipe the
interior of the socket with a dry cloth.
Advertisement
