Specification - LG 40LH5300 Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to the LED TV used LA68H
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
(1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C
(2) Relative Humidity: 65 % ± 10 %
(3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
(4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
(5) The receiver must be operated for about 5 minutes prior to
the adjustment.
4. Model General Specification
No. Item
1 Receiving System
2 Available Channel
3 Input Voltage
4 Market
5 Screen Size
6 Aspect Ratio
7 Tuning System
8 Module Direct
9 Operating Environment
10 Storage Environment
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes

SPECIFICATION

Specification
ATSC / NTSC-M / 64 QAM / 256 QAM
1) VHF : 02~13
2) UHF : 14~69
3) DTV : 02-69
4) CATV : 01~135
5) CADTV : 01~135
AC 110V, 60HZ
North America
43/49 inch Wide (1920 × 1080)
40 inch Wide (1920 × 1080)
16:9
FS
NC430EUN-AACR1
NC490EUN-AACR1
NC400DUE-VXCP3
1) Temp : 0 ~ 40 deg
2) Humidity : ~ 80 %
1) Temp. : -20 ~ 60 deg
2) Humidity : ~ 85%
3. Test method
(1) Performance: LGE TV test method followed
(2) Demanded other specification
- Safety : CE, IEC specification
- EMC : CE, IEC
FHD / 60Hz
FHD / 60Hz
LGD
LGD FHD / 60Hz
INX
- 6 -
Remarks
Mark : 110V, 60Hz (N.America)
43LF5400-UE
49LF5400-UE
40LH5300-UA
43LF5400-UE
49LF5400-UE
40LH5300-UA
LGE Internal Use Only