Table of Contents
Advertisement
1. On/Off Switch
2. Auxiliary 240V AC output
For water cooler – Maximum load 3A – Do not connect to power tools etc
3. Fuse Holder
3A fuse for water cooling socket
4. Mains input cable
Fit required plug as per your electrical installation
5. Gas input connector
Connect input gas hose ensuring connection is tight
6. Earth for chassis
If experiencing localized interference when using machine, connect workbench to this point
using correct graded earth wire (not normally used)
8
Connections for TIG161
Rear machine connections
Fig 1
Advertisement
Table of Contents
