Pressbar Handset with Hytrel
Models 12515-007, 12515-008 & 12515-009
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12515-007 (6-foot), 12515-008 (15-foot), and 12515-009 (25-foot) Pressbar Handset with
®
Hytrel
Cord Replacement Kits are intended to replace the armored cord pressbar handset on the
following GAI-Tronics telephones: Models 226-001, 227-001, 276-001 and 277-001.
This kit includes the following components:
Qty
Description
1
Handset with Hytrel
1
Spring clip
#10-32 3/8-inch screws
2
1
Cable tie
You will need the following tools to install the handset with armored cord:
Phillips screwdriver
Flathead screwdriver
5/64-inch Allen screwdriver
Torx Security Screwdriver, T-25 (GTC. No. 233-001)
Needle-nose pliers
GAI-TRONICS 3030 KUTZTOWN RD. READING, PA 19605 USA
610-777-1374 800-492-1212 Fax: 610-796-5954
V
ISIT WWW
G A I - T R O N I C S ®
A H U B B E L L C O M P A N Y
Replacement Kits
®
coil cord
.
-
.
GAI
TRONICS
COM FOR PRODUCT LITERATURE AND MANUALS
Pub. 42003-255A
Cord
®
Need help?
Do you have a question about the Gai-Tronics 12515-007 and is the answer not in the manual?
Questions and answers