ImageLab FS-5C05 User Manual page 17

SCANNER MODES
Adding Memory to Your Scanner by Using a SD Memory Card
Battery Life Indication
Insert an SD card into the SD Slot located on the right side of the scanner. The
SD card can only be inserted in one direction (label side up). Make sure that
the "write protection" switch is set to "off" on the SD card, or else the scanner
will not be able to use it. When an SD card is inserted to the scanner, the
scanner will only save pictures to the SD card. When the SD card is removed,
the scanner will save scans to its internal memory.
You will see an SD icon appear on the LCD when you have an SD card
inserted in the scanner.
Battery Life Indication
The battery icon will begin to flash when the batteries run low on your scanner.
Even if you run out of batteries, you will not lose the pictures that are in your
scanner. The pictures will stay in your scanner until you erase them.
16