ImageLab FS-5C05 User Manual page 13

USING YOUR SCANNER
Scanning Your First Negative
1. Open the Negative Tray
The Negative Tray has 5 openings for Negatives. Place negative strip so that
each frame is centered in the openings, and the space between frames are
lined up with the dividing spacers on the tray. Do not flip/reverse your negatives
or your scan will be scanned backwards.
2. Close the Negative Tray
Make sure that the Negatives are centered in the tray openings.
3. Slide the 4-way switch to SCAN
The LCD screen will turn on. When the scanner is ready, the screen will be
white with a battery icon in the upper left corner and a counter centered on the
bottom of the screen. Counter shows the remaining number of scans you can
make before running out of internal memory or the memory on you SD card if
inserted.
4. Insert the Negative Tray into the Tray Slot
Insert the Negative Tray into the scanner, from right to left, with the slide in the
tray facing right side up and facing you.
5. Move your Slide Tray into Position
Gently push the tray right to left. You will feel the tray stop/click as the slide tray
positions itself for scanning. When you see your negative in the LCD, center
your slide by moving it slightly to the right or left until you are satisfied.
6. Press the NEGATIVE Button
When you press the NEGATIVE button, the scanner will scan the negative and
you will see your scan for a moment on the LCD. When the LCD goes back to a
live preview you are ready to scan your next negative.
12