Table of Contents
Advertisement
Section 6 - Troubleshooting
• Configure your Internet settings:
• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button
to restore the settings to their defaults.
• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure
nothing is checked. Click OK.
• Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
• Close your web browser (if open) and open it.
• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should
open the login page for your the web management.
• If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and
try accessing the configuration. If you have multiple computers, try connecting using a different computer.
2. How can I upgrade the firmware on the device?
To update the firmware on the DWR-530, insert the device into an available USB port on your PC. Next, launch the firmware utility
(FirmwareUpgrade.exe). Click the Start button to update the firmware. Please don't remove the DWR-530 while the upgrade is in progress.
To finish the firmware update procedure, click the OK button.
Note: For update information, please follow the revision notice on the official web site.
3. I'm having problems installing the D-Link Connection Manager.
Your antivirus program may be preventing installation of the software. Try disabling your antivirus software temporarily while you install
the D-Link Connection Manager.
D-Link DWR-530 User Manual
49
Advertisement
Table of Contents
