Table of Contents
Advertisement
Section 4 - Security
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity
before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based configuration by opening a web browser and entering the
IP address of the router (192.168.0.1). Click on Wireless Settings on the left side.
2. Next to Security Mode, select WPA-PSK or WPA2-PSK.
3. Next to Pre-Shared Key, enter a key (passphrase). The key is an alpha-numeric
password between 8 and 63 characters long. The password can include symbols
(!?*&_) and spaces. Make sure you enter this key exactly the same on all other
wireless clients.
4. Click Save Settings to save your settings. If you are configuring the router with a
wireless adapter, you will lose connectivity until you enable WPA-PSK (or WPA2-
PSK) on your adapter and enter the same passphrase as you did on the router.
D-Link DWR-530 User Manual
Configure WPA-PSK/WPA2-PSK
39
Advertisement
Table of Contents
