Table of Contents
Advertisement
Linksys
Ping Test
Ping Test is used to determine the accessibility of a host on the network
Figure 42: Ping Test Screen
Data - Ping Test Screen
General
IP Type
Enter the IP type of destination address
IP or URL Address
Enter the IP address or domain name that you want
to ping
Packet Size
Enter the size of the packet
Times to Ping
Select the desired number from the drop-list
•
5
•
10
•
15
•
Unlimited
Chapter 4 Access point Management
Packet Capture
Packet Capture is used to capture and store 802 3 packets received and
transmitted by the access point based on one specified network interface
Network interface can be radio, SSID or LAN
Figure 43: Packet Size Screen
Data - Packet Size Screen
Network Interface Select the desired network interface from the drop-
down list The interface can be Wireless Radio, SSID or
Ethernet
Start Capture
Click it to start the capture You will be asked to specify
a local file to store the packets
Stop Capture
Click it to stop the capture
35
Advertisement
Table of Contents
