Samsung SPE-400 User Manual page 66

Network encoder
Hide thumbs Also See for SPE-400:
Table of Contents

Advertisement

appendix
PROBLEM
Cannot record into the SD memory
card.
SD memory indicator does not
turn on even when the SD memory
card is inserted.
SD memory card is inserted but
the network encoder does not
operate properly.
Cannot format the SD memory
card.
66_ appendix
Check if the memory card is defective.
Check if the write protection tab of the memory card is set to "Lock".
Check if the memory card is defective.
Check if the <Record> is checked in <Setup>
menu.
Check if the memory card is inserted in the proper direction. Operation
of memory card that is formatted by other devices is not guaranteed with
this network encoder unit
Format the memory card again in <Setup>
menu.
Check if the write protection tab of the memory card is set to "Lock".
SOLUTION
<Event>
<Event>
<SD Record>
<SD Record>

Advertisement

Table of Contents
loading

Table of Contents