Using The Metronome - Casio CDP-135 User Manual

Playing the Digital Piano

Using the Metronome

1. 7
Press .
• This starts the metronome.
2.
To change the beat, hold down
the BAR BEATS key.
4
• Keep depressed as you advance to step 3, below.
3. 4
Hold down as you press one of the
METRONOME TEMPO/BEAT keys to select a
beat setting.
• You can specify beats per measure value of 0, 1, 2, 3,
4, 5, 6, 7, 8, or 9. Specifying 0 as the setting plays a
straight click, without any chime. This setting lets you
practice with a steady beat.
EN-10
4
as you press
4.
While holding down
TEMPO/BEAT keys to specify a tempo value in
the range of 30 to 255 beats per minute.
• Each press of the + or – key raises or lowers the tempo
value by 1.
• You can use the value input keys (0 to 9) to enter a
specific three-digit. Be sure to input all three digits.
Example: To enter "96", press keys 0, 9, 6.
7
5.
Press to turn off the metronome.
• To return to the initial default setting (tempo value:120),
press the + and – keys at the same time in step 4.
To adjust the metronome volume
You can perform the following procedure at any time,
regardless of whether or not the metronome is sounding.
1.
While holding down
VOLUME keys to change a volume value in the
range of 0 to 42.
• Each press of the + or – key raises or lowers the
metronome volume value by 1.
• To return to the initial default setting, press – and + at the
same time.
4
, use the METRONOME
4
, use the METRONOME