Using The Media Player - Toshiba 40CV600E Owner's Manual

Adjusting the clock phase of the picture
If the clock phase, which synchronize the PC
signal and LCD display, is not optimized, the
picture will blur.
This function enables you to adjust clock phase
and display a clear picture.
1
From the PC Setting menu, press
select Clock phase.
2
Press or to obtain a clear picture.
Clock phase
Adjusting the sampling clock
If the sampling clock does not match with the dot
clock frequency of the PC, blurred picture detail
will occur, or screen width will change, or drift
patterns in vertical lines may be apparent.
This function enables you to adjust it and
optimize the picture.
1
From the PC Setting menu, press
select Sampling clock.
2
Press or to optimize the picture.
Sampling clock
Resetting the PC setting
The Reset function adjusts the PC Setting to the
factory settings.
1
From the PC Setting menu, press
select Reset.
2
Press Q.
Note:
When a PC is connected using HDMI none of
these function will be available.
Connecting your TV
or to
0
or to
0
or to

Using the Media Player

The TV allows you to enjoy photos stored on a
USB device.
Notes:
• Do not insert/remove a USB device while in
use.
• MENU is not available during playback.
Media Player Specifi cations
Device
USB device:
USB Mass Storage Class devices (MSC)
Notes:
• Connectivity is not guaranteed for all
devices.
• Connect the USB device to the TV directly.
• Do not use a USB hub.
Supported fi le system
FAT12, FAT16 and FAT32
You must obtain any required permission from copyright owners
to download or use copyrighted content. Toshiba cannot and
does not grant such permission.
Basic operation
Auto Start:
1
From the FUNCTION menu, highlight Media
Player and press Q.
Media Player
Photo
Auto Start
2
Press or to highlight Auto Start.
3
Press or to select On.
4
Insert a USB device into the USB terminal on
the right side of the TV.
5
A confi rmation message will appear. Highlight
Yes, and then press Q.
6
Press or to select Photo, and then
press Q. The list window of fi les will appear.
7
Press or to select the USB device if the
selection screen is displayed.
Note:
If Auto Start is set to Off, you can start the
Media Player manually.
On
31