Connecting a PC
Input resolution settings
Selecting the input resolution
• Some input signals may have to be registered manually to
display properly.
• The input signals (resolutions) in the list below are not
distinguishable when received. In such case, you have to
set the correct signal manually. After setting once, it will
display when the same signal (resolution) is input again.
640 x 480 / 60 Hz
848 x 480 / 60 Hz
1024 x 768 / 60 Hz
1280 x 768 / 60 Hz
1360 x 768 / 60 Hz
NOTE
• You can only select the "Input Signal" on the Setup menu
when receiving one of the 5 input signals listed above.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press a / b to select "PC Setup", and then
3
press ENTER.
Press a / b to select "Input Signal", and then
4
press ENTER.
Press a / b to select the desired input signal
5
on the display, and then press ENTER.
1024 x 768
1280 x 768
1360 x 768
40
(Example)