Attaching/Detaching The Stand And Wall Mounting - Technika LCD40-270-ROI User Manual

DETACHING THE STAND
Detaching the Stand
1) Remove the screws highlighted
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling
where there could be any electric wires, water or gas pipes.
Wall mounting the TV
This television requires a VESA 400 x 200 wall mount, or equivalent.
1) Remove the four screws highlighted below.
2) The wall mount can now be easily attached to the mounting holes on the rear of the TV. These holes
are indicated in the picture below.
For optimum viewing, if wall mounting the TV
higher than eye level, the TV should be tilted
downwards so that the TV's screen is 'face on'.
See fi g 1 and 2
Important – If wall mounting this TV, only
use the screws already provided in the wall
mounting holes. Using other screws which
are longer could cause irreparable damage to
internal parts.
10
Detaching the stand and wall mounting
fi g 1
INCORRECT
CORRECT
fi g 2
TV
Viewing angle
TV