Table of Contents
Advertisement
2.2 Connect your monitor to your computer
1.
Power off and unplug your computer.
2.
Connect the 15-Pin ends of the signal cable to the VGA port of your monitor and the VGA OUT jack
on the back of your computer. Secure the screws on both ends of the signal cable.
3.
Connect one end of power cord to the monitor, then connect the other end of the power cords to the
nearest electrical outlet.
4.
Power on your computer and monitor. If your monitor displays an image, the installation has been
successfully done. If the monitor does not display any image, check all the connections.
Cautions: 1. For installation, please complete signal cord connection before plugging the power cord
into the electrical outlet to avoid damaging the monitor.
2. During installation, please support the front frame with your hand at its center of gravity to
avoid dropping and damaging the monitor.
Overview of the ports on the monitor:
1.
AC power supply input
2.
AUDIO signal input (V241a only)
3. DVI signal input
4. VGA signal input
4
Advertisement
Table of Contents
