Table of Contents
Advertisement
Management
Auto-Sleep Mode
Power Saver Mode
Power-On Recall
Mode Display
Monitor Status
DDC/CI support
button. The factory default setting is
"30 seconds".
To select the function of power
management for your monitor.
To enable the energy-saving
function, Select
On
off
The factory default setting is On.
The "Power Saver Mode"control
allow quick user selection of
reduced power modes while the
monitor is still in use.Select:
Off
10% Savings
20% Savings
30% Savings
40% Savings
50%Savings
The factory default setting is On.
Restores power to the monitor
following an unexpected removal of
power. Select:
On
Off
The factory default is On.
The resolution, refresh rate and
frequency information will be
displayed when the OSD main
menu is accessed. Please select
"On" or "Off" as the factory default
on-off setting.
The operational status of your
monitor will be displayed when you
power on your monitor. To select
the positions where the status
information is displayed:
Top
Middle
Bottom
Off
The factory default setting is "Top"
Controlling some OSD menu
functions, such as brightness,
10
Advertisement
Table of Contents
