Adjusting Movies For Increased Expressiveness (Multiple Pixel Control) - JVC DLA-X900R Instructions Manual

Adjusting Movies for Increased
Expressiveness (Multiple Pixel Control)
The new image-processing algorithm developed by JVC
helps to create a natural impression that is sharper at
areas in focus, and softer at areas that are not in focus,
enabling you to enjoy highly expressive 4K images with
a greater sense of depth.
Press the [MPC] button to display the
1
adjustment menu
You can also perform setting from "Picture
0
Adjust"""MPC Level" in the menu.
INPUT
.
Make adjustments according to your
preference based on the setting of the
2
selected "Picture Mode"
* The factory setting varies with the "Picture
Mode".
Item Setting
4K e-shift On (4K)/Off
(2K)
Original Auto/4K/
Resolution 1080p/
1080i/720p/
480p
Enhance 0 to 100
Dynamic 0 to 100
Contrast
Smoothing 0 to 100
NR 0 to 10
Picture Adjust
>> MPC Level
4K e-shift On
Original Resolution Auto
Enhance 0
Dynamic Contrast
0
Smoothing
0
NR 0
Before Reset
Exit Operate Back
MENU Select BACK
Description
Switches the display
resolution.
For selecting a resolution for
the content you are viewing.
Enhances the sharpness of
the image.
Enhances the contrast of the
image.
Enhances the blurriness of
the image for a softer effect.
For reducing the noise of the
video image.
In the default "Original Resolution" setting ("Auto"), the
0
resolution is set automatically.
By increasing the setting range, you can expect
0
enhanced effects.
Images are displayed in the original resolution (2K)
0
when "4K e-shift" is set to "Off".
The setting is fixed at "On" during 4K signal input.
0
During 3D signal input and when "2D to 3D conversion"
0
is set to "On", the setting is fixed at "Off".
"Original Resolution", "Zone", "Enhance", "Dynamic
0
Contrast", and "NR" can be adjusted even when "4K e-
shift" is set to "Off".
* MPC is the abbreviation for Multiple Pixel Control.
Press the [MENU] button to exit
3
Toggling between the States before
and after Adjustment
Pressing the [BEFORE/AFTER] button on the remote
control enables you to toggle between the states before
adjustment (BEFORE) and after adjustment (AFTER).
39