LevelOne WAP-6003 User Manual page 29

MAC Address Control allows you to assign different access right for different users and to
assign a specific IP address to a certain MAC address.
MAC Address Control
Connection control
Check "Enable" to enable the "MAC Address Control". All of
the settings in this page will take effect only when "Enable" is
checked.
Check "Connection control" to enable the controlling of which
wired and wireless clients can connect to this device. If a client is
denied to connect to this device, it means the client can't access to
the Internet either. Choose "allow" or "deny" to allow or deny the
clients, whose MAC addresses are not in the "Control table"
(please see below), to connect to this device.
29