Disassembly Instructions; Remove The Two Screws, Take Out The Remote Control Board - Haier HL42T Service Manual

6. DISASSEMBLY INSTRUCTIONS

1. Remove the Back Cover
2. Remove the Pedestal
3. Remove the power module
4. Remove the Main board
5. Remove the remote control board
Remove the twelve screws indicated
on figure above by
Then remove the back cover from the unit.
Lay down the unit so that rear
cover faces upward
Remove the four screw from the rear
cover indicated with
Then remove the pedestal.
Remove the four screws indicated on the
figure above by
Then remove the power module
Remove the five screws indicated on the
figure above by
Disconnected the coupler CNA1、CN1、CNE1、
CNE2、CND1、CNC1、CNA2
Remove the Main board
Remove the two screws, take out the remote control
board
26