Download Table of Contents Print this page

Haier HL26K Service Manual

Hide thumbs Also See for HL26K:

Advertisement

Quick Links

HL26K
@
(2008)(Haier Electronic Company Limited)
1
All rights reserved. Unauthorized copying and distribution is a
violation of law.

Advertisement

Table of Contents
loading

Summary of Contents for Haier HL26K

  • Page 1 HL26K (2008)(Haier Electronic Company Limited) All rights reserved. Unauthorized copying and distribution is a violation of law.
  • Page 2 WARNING This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered b electricity should be serviced or repaired only by experienced professional technicians.
  • Page 3: Table Of Contents

    CONTENT 1 .Warning ................................4 2. Specification..............................6 3. LOCATION OF CONTROLS AND COMPONENTS ................7 3.1.Board Location ...........................7 3.2. Mainboard Assembly ........................8 3.3 LCD PANEL ..........................11 4. INSTALLATION INSTRUCTIONS......................13 4.1 External Equipment Connections .....................13 4.2 HDMI CINNECTIONS........................19 5. OPERATION INSTRUCTIONS ........................22 5.1 Front panel controls..........................22 5.2 Back panel controls ..........................23 5.3 Setting Up Your Remote Control....................24...
  • Page 4: Warning

    1 .Warning CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. IMPORTANT SAFETY INSTRUCTIONS Read all of the instructions before using this appliance.
  • Page 5 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a grounding prong. The wide blade or grounding prong are provided for your safety. If the plug does not fit, contact an electrician to replace the obsolete outlet.
  • Page 6: Specification

    After completing any service or repair to this TV, ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition. Power source Operate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your TV dealer or local power company.
  • Page 7: Location Of Controls And Components

    3. LOCATION OF CONTROLS AND COMPONENTS 3.1.Board Location Parts number Description A Board Mainboard Assembly B Board Power Supply Board Assembly...
  • Page 8: Mainboard Assembly

    3.2. Mainboard Assembly 3.2.1 Function Description Mainboard Assembly: Process signal which incept from exterior equipment,then translate into signal that panel can display. Signal flowing chart.
  • Page 9 MTk5380 3.2.2 Connector definition Power connector(CNA1)
  • Page 10 Pin number Signal name Description ON/OFF Control the power of system Ground 5VSB Power of TV standby Ground Ground Power of system Power of system IR connector (CNE1) Pin number Signal name Description Supply the Power of bright and IR receiver Receive IR signal Show green when TV standby Show blue when TV working...
  • Page 11: Lcd Panel

    Pin number Signal name Pin number Signal name Pin number Signal name LVDS VDD Not use LVDS VDD Not use LVDS VDD Not use LVDS VDD Not use Not use Not use CK1P LVDS_SEL CK1N Pin number Signal name Not use Not use AMP connector(CNA2) Pin number...
  • Page 12 3.4.2 Connector definition Pin No Symbol Description Note Power DC 12V Power DC 12V Power DC 12V Power DC 12V Power DC 12V RO[0]N ODD LVDS SINGAL- RO[0]P ODD LVDS SINGAL+ RO[1]N ODD LVDS SINGAL- RO[1]P ODD LVDS SINGAL+ RO[2]N ODD LVDS SINGAL- RO[2]P ODD LVDS SINGAL+...
  • Page 13: Installation Instructions

    RE[2]N EVEN LVDS SINGAL+ CND1(Header):S14B-PH-SM4-TB(D)(LF)(JST) or equivalent. Pin No. Symbol Description +24V Power input Ground BLON BL ON/OFF Internal PWM Control 4. INSTALLATION INSTRUCTIONS 4.1 External Equipment Connections Accessories Antenna Connection Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .
  • Page 14 External Equipment Connections NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some different ways to connect your TV with different input sources.
  • Page 19: Hdmi Cinnections

    Monitor Out Setup Connect the second TV or monitor to the TV`s AV OUT. See the Operating Manual of the second TV or monitor further details regarding that device`s input settings. Note YPbPr, PC, HDMI, DTV input sources cannot be used for Monitor out.
  • Page 20 HDMI Cable (not supplied with the product) HDMI to DVI Cable ( not supplied with the product) Analog Audio Cable (Stereo to RCA type) (not supplied with the product)
  • Page 21 Power source Removing the table stand and installing a wall mount bracket...
  • Page 22: Operation Instructions

    5. OPERATION INSTRUCTIONS 5.1 Front panel controls 1. MENU: Press to show the on-screen menu. 2. INPUT: Press to show the input source mode. In the MENU/INPUT screen, these buttons serve as OK button. 3. VOL -/+: Press to adjust the volume .In the MENU screen, these buttons serve as left/right buttons. 4.
  • Page 23: Back Panel Controls

    5.2 Back panel controls 1 HDMI/DVI: Connect an HDMI/DVI signal to the jack. 2 PC VIDEO IN: Connect the monitor output connector from a PC to the jack. 3 PC Audio IN: Connect an audio cable for a computer to the jack. 4 DVI Audio IN: Connect a component video device to these jacks.
  • Page 24: Setting Up Your Remote Control

    5.3 Setting Up Your Remote Control The remote control cannot be operated unless the batteries are properly loaded. When using the remote control, aim it at the remote control sensor on the. Notes • Do not expose the remote control to shock or liquids. •...
  • Page 25: Disassembly Instructions

    6. DISASSEMBLY INSTRUCTIONS 1. Remove the Support Stand ① Lay down the unit so that rear cover faces upward ② Remove the four screw from the rear cover indicated with ③ Then remove the Support Stand. 2. Remove the Back Cabinet ①...
  • Page 26: The Unit

    figure above by Remove the two screws, take out the remote control ② Disconnected the coupler CNA1、CN1、 board CNE1、CNE2、CND1、CNC1、CNA2 ③ Remove the Mainboard 6.1 THE UNIT. The unit includes Packaging Assembly、Front Cabinet Assembly、Back Cabinet Assembly、Flat Panel Bracket Assembly、Support Stand Assembly、LCD panel、Power Supply Board Assembly 、Harness Assembly.
  • Page 27: Support Stand Subassembly

    6.2 Support Stand Subassembly Name Description Parts number Support Stand Subassembly Bolt GB818 85 M4*16 6.3 Back Cabinet Assembly Name Description Parts number Back Cabinet Assembly Plastic Back Cabinet Nameplate on Side av Nameplate on Back Cabinet Screw SJ2824-87 ST4X12F (Black)
  • Page 28: Flat Panel Bracket Assembly

    6.4 Flat Panel Bracket Assembly Components List Parts number Name Description Flat Panel Bracket Assembly Metal Terminal Board 6.5 Front Cabinet Assembly...
  • Page 29: Harness Assembly

    Components List Parts number Name Description Front Cabinet Assembly Plastic Front Cabinet Sound Box Keypad Assembly Screw SJ2824-87 ST4*16F(φ18) Remote Control Board Assembly 6.6 Harness Assembly 6.6.1. Wire Photo 6.6.2 Components List Name Description Parts number Key wire (PH-3)-1100mm-(PH-3) Remote control wire (D2006-5P)-500mm-(D2507T-5P) Combine wire TJC3-7P-350MM-TJC3-2P,TJC3-7P...
  • Page 30: Measurements And Adjustments

    7. MEASUREMENTS AND ADJUSTMENTS The way to the factory mode menu: : press the manu button : input 8893 Finished these operations , system will be into the factory mode menu. 1. Version Info 2. Video 3. Audio...
  • Page 31 4. Channel 5. Gamma 6. BackLight...
  • Page 32 7. Function...
  • Page 33: Block Diagram And Circuit Diagram

    8. BLOCK DIAGRAM AND CIRCUIT DIAGRAM 8.1 BLOCK DIAGRAM MTK5380 8.2 CIRCUIT DIAGRAM...
  • Page 34 R0603/SMD OCSET R2069 100K R0603/SMD D184 R2070 SCHOTTKY DIODE/B340A D/SMA/SMD R0603/SMD +5VSB CB1006 0.1uF CNE1 0.8 x (1+12K/2.2K) = 5.1V C0603/SMD NUSTC_5380P1_V2:HAIER CNE2 IR_IN 100R R1694 OIRI Title ADIN1_K0 LED_RED# R0603/SMD INDEX/MAIN POWER ADIN2_K1 +5VSB LED_GRE# Size Document Number Drawn...
  • Page 35 C100UF16V/D6.3H7 0.1uF CE16 C0603/SMD 100uF/16V 100uF/16V C0603/SMD C100UF16V/D6.3H7 C100UF16V/D6.3H7 CE611 22uF/16V R958 C22UF16V/D4H7 R0603/SMD R0603/SMD 1.25 x (1+120/110) = 2.6V 1.25 x (1+180/110) = 3.3V NUSTC_5380P1_V2:HAIER Title DIGITAL POWER Document Number Drawn Size MT5380P1-V2 Date: Wednesday, January 30, 2008 Sheet...
  • Page 36 1.25 x (1+100/100) = 2.5V 10% tolerance 7805 TO-263-3/SMD +5V_TUNER CE224 C574 CB398 CB197 220uF/16V 0.1uF 0.1uF C330UF10V/D6.3H7 C0603/SMD C0603/SMD C0603/SMD POWER SUPPLY +5V FOR TUNER NUSTC_5380P1_V2:HAIER Title ANALOG POWER Document Number Drawn Size MT5380P1-V2 Date: Wednesday, January 30, 2008 Sheet...
  • Page 37 0.1uF FB18 AVDD33_XTAL 1N4148 BEAD/SMD/0603 4.7K 4.7K R0603/SMD R0603/SMD For PDP use. OSDA0 OSCL0 CB73 0.1uF C0603/SMD C0603/SMD FB13 150_Ohm_2A R1206/SMD HOLE/GND HOLE/GND HOLE/GND HOLE/GND HOLE/GND NUSTC_5380P1_V2:HAIER Title PERIPHERAL Document Number Drawn Size MT5380P1-V2 Date: Wednesday, January 30, 2008 Sheet...
  • Page 38 R0603/SMD FAT_IN2- R0603/SMD D_IF_O/P_1 R1630 R0603/SMD FAT_IN2+ C0603/SMD D_IF_O/P_2 GND3 ROUTE SYMMETRICALLY GND4 TUNER_ALPS/E TUNER/ALPS/E C158 C157 12pF/NC 12pF/NC C0603/SMD C0603/SMD L/IND/SMD/0603 L/IND/SMD/0603 NUSTC_5380P1_V2:HAIER Title Analog PLL / USB2.0/TUNER Size Document Number Drawn MT5380P1-V2 Date: Wednesday, January 30, 2008 Sheet...
  • Page 39 0.1uF 0.1uF 0.1uF 0.1uF 4.7uF/10V 22uF/16V C0603/SMD C0603/SMD C0603/SMD C0603/SMD C0805/SMD C22UF16V/D4H7 CA17 CA19 CA20 CA21 CA22 CA28 CA23 NUSTC_5380P1_V2:HAIER 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 4.7uF/10V C0603/SMD C0603/SMD C0603/SMD C0603/SMD C0603/SMD C0603/SMD C0805/SMD Title DDR1 MEMORY Document Number Drawn...
  • Page 40 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF C0603/SMD C0603/SMD C0603/SMD C0603/SMD C0603/SMD C0603/SMD C0603/SMD ICE mode DDR BYPASS Near IC NUSTC_5380P1_V2:HAIER Trap Mode OPCTRL5 OPCTRL4 Title Core Reset 1 us FLASH/JTAG/UART/IR/TRAP Document Number Drawn Size MT5380P1-V2 Date: Wednesday, January 30, 2008 Sheet...
  • Page 41 OSDA1 HPD2 SDA_SINK D1 Shield HDMI1_RX1+ RX5V1_DDC_SDA R2084 OSCL1 SDA2 SCL_SINK HDMI1_RX2- D2 Shield HDMI1_RX2+ I2C_CTL_EN RX5V1_DDC_SCL SHELL3 SCL2 SHELL1 HDMI/HAIER EDID_BRG_EN NC/SCHOTTKY DIODE/B340A RX0_CB R2085 POW0 RX0_C HDMI1_RXC- R2086 D216 R2043 R2066 D/SMA/SMD 100K HDMI1_RXC+ 1K/NS HDMI2_5VIN HDMI2 INPUT...
  • Page 42 R0603/SMD R401 SELECT R0603/SMD SELECT Low For Internal OPCTRL2 Back Light circuit SELECT Hi For External R404 4.7k 2N3904 R399 R0603/SMD SOT23/SMD R0603/SMD NUSTC_5380P1_V2:HAIER Title LVDS/MUTE +12V Size Document Number Drawn CE71 CB216 CE72 CB217 MT5380P1-V2 100uF/16V 220uF/16v 0.1uF 0.1uF...
  • Page 43 C0603/SMD ESD0603/SMD R0603/SMD YPBPR0R_IN C634 4.7uF/6.3V R153 AIN2_R +5VSB C0603/SMD R0603/SMD Y_GND R1190 R1189 C355 10nF R0603/SMD C0603/SMD RCA3X1 R0603/SMD RCA3/HAIER PB0_IN R1192 C357 10nF PB0P 80/100MHZ R0603/SMD C0603/SMD YPBPR0R_IN R0603/SMD DVD_DET 4.7K BEAD/SMD/0603 YPBPR0L_IN GPIO R0603/SMD DVD_PB1 C359 PB_IN...
  • Page 44 1,2,3,4,5,6,7,8,9,10,12,13,14,15 +5VSB NEARLY IC 1,2,13,15 +5VSB +5VSB VGA/HAIER R161 4.7nF C131 NEARLY VGA CON. R0603/SMD C0603/SMD RED_GND 80/100MHz FB67 R163 10nF C132 GRN_GND 1N4148 BEAD/SMD/0603 R0603/SMD C0603/SMD VGASDA_IN 1N4148/SMD VSYNC VSYNC BLU_GND HSYNC HSYNC HSYNC# R165 C134 1N4148 VGA_PLUGPWR NS/EZJZ0V800AA...
  • Page 45 SY1R_IN R0603/SMD ESD0603/SMD R0603/SMD R1525 C460 47pF D146 CVBSO_GND C0603/SMD NS/EZJZ0V800AA R0603/SMD D148 D104 ESD0603/SMD RCA2X1 R1215 C570 GND_CVBS RCA2/HAIER R0603/SMD C0603/SMD NS/EZJZ0V800AA NS/EZJZ0V800AA ESD0603/SMD ESD0603/SMD AV1R_IN AV1L_IN AV1_IN SY1_IN R1597 C534 47nF R0603/SMD R1560 C0603/SMD AV3_IN R1856 R1857 C699 47nF...
  • Page 46 C0603/SMD AIN3_R AIN3_R VIMD_AADC COAXIAL A0SDATA0 A0SDATA0 AOMCLK AOMCLK C195 AOLRCK 4.7uF/10V CB166 HPDET# R324 GPIO_4 AOBCK C0805/SMD 0.1uF R0603/SMD C0603/SMD +3V3SB R1612 R0603/SMD OPCTRL1 NUSTC_5380P1_V2:HAIER Title LINE OUT/CEC Document Number Drawn Size MT5380P1-V2 Date: Wednesday, January 30, 2008 Sheet...
  • Page 47 AV3L_IN C601 1uF SOT23/SMD C0603/SMD R0603/SMD HPOL CE21 220uF/16V PHONE C602 1uF C0603/SMD AV3R_IN C705 4.7uF/6.3V R1867 AIN3R AV3R_IN C220UF16V/D6H11 R0603/SMD PHONE/HAIER C0603/SMD C0603/SMD R0603/SMD HPOUTR HPOR CE20 220uF/16v C220UF16V/D6H11 R0603/SMD HPDET AR2_OUT/LINE R1615 R1616 HPOUTL AL2_OUT/LINE CVBS_OUT R0603/SMD R0603/SMD SY1L_IN C653 4.7uF/6.3V...
  • Page 48 C/DIP C689 GPIO_8 0.47uF/50V GPIO_8 C/DIP L146 33uH/2A Speaker-L+ 13,14 Audio AMP L5-9 C690 13,14 0.1uF/50V MUTE C/DIP MUTE R1792 AR1_OUT/AMP AR1_OUT/AMP AL1_OUT/AMP R0805/SMD AL1_OUT/AMP R1793 R0805/SMD NUSTC_5380P1_V2:HAIER Title Size Document Number Drawn MT5380P1-V2 Date: Wednesday, January 30, 2008 Sheet...
  • Page 49: Wiring Connection Diagram

    您正在使用 ZwCAD 2005 试用版 详情请查阅WWW.ZwCAD.COM...
  • Page 50: Trouble Shooting Guide

    10. TROUBLE SHOOTING GUIDE 10.1. Simple check 10.1.1 PDP is not bright 10.1.2 No picture...
  • Page 51 First, check cables which connect with PSU,then check as follows 1) Check input voltage (CNA1) 2)Check output voltage (CND1)
  • Page 52: Panel Failure

    10.1.3 No sound First,check cables which connect with PSU,then check as follows 1) Check input voltage as NO picture 2) Check speaker output 10.2 Panel failure Failure Mode Part Name Description Phenomena Failure cause Block Defect :TCP cracking or cracking V B/D Vertical bar Dim or L/D...
  • Page 53 :Mis-align between TCP and Panel Vertical color :Panel failure V L/D line(light :TCP failure dark forever) Horizontal H B/D Horizontal H Dim gary line Horizontal H L/D line(light dark forever) Failure Mode Part Name Description Phenomena Failure cause Bright dark Incoming Inspection Standard Dot Defect dot in panel...
  • Page 54 B/L normal, only Black Black screen Screen display LCD Vcom imbalance FIIcker Crosstalk Abnormal Only color Capacitance improper bring crosstalk inside LCD Color abnormal panel 1. Chip lose action Only color 2. IC short or joint bad Abnormal abnormal 3. Panel and VSC connect bad Color Failure Mode Part...
  • Page 55 F/M in B/L ,white, F/M in B/L unit back Rotundity or wire like Failure Mode Part Name Description Phenomena Failure cause Brightness Light bottom of LCM B/L unit badness leakage brighter than normal Mechanlcal B/L brightness Uniformity Sheet in B/L unit is uneven or B/L asymmetric Lack screw or...

Table of Contents