Advertisement
5
The default language of the menu system is English. To select another
language, press the Menu button on the remote control. Select
Extended and press the
button. Select your language and press the
button to exit the menu system.
Adjust the image
1
If you don't see an image, press the Source Search button on the
projector or remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the right.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
Turn the zoom ring to enlarge or reduce the image.
4
Turn the focus ring to sharpen the image.
5
If your image looks like
one side of the screen at an angle. Place the projector directly in front of
the center of the screen, facing the screen squarely.
PowerLite X11: Use the horizontal slider on the projector to correct it.
PowerLite X11H/X14H: Press the
Then press the
or
button to correct the image.
6
PowerLite X11: Your projector automatically adjusts images that look
like
or
, but if necessary you can press the
the projector to correct them.
PowerLite X11H/X14H: If your image looks like
or
button on the projector to correct it.
button. Select Language and press the
button. Press the Menu
or
, you've placed the projector off to
or
button on the projector.
or
button on
or
, press the
Using the remote control
Install the batteries as shown (two AA batteries).
Turn projector on
and off
Access projector
menus
Turn off projector
display
For more information on using the remote control, see the User's Guide on
your projector CD.
Troubleshooting
If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
•
Make sure the power light on the projector is green and not flashing,
and the A/V Mute slide is open.
•
Press the Source Search button on the projector or the remote control
to switch to the correct image source, if necessary.
•
If you're using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
•
laptop, open System Preferences and select
If you're using a Mac
®
Displays. Select the VGA Display or Color LCD option if necessary,
then click the Arrange or Arrangement tab, and select the Mirror
Displays checkbox.
Choose which
source to display
Navigate projector
menus
Get solutions to common
problems
. You may have to hold down the
Advertisement
