GET STARTED
1. To turn on the dinosaur head, open the pouch in the chin and
remove the battery case.
2. Move the switch on the case to HI ( ) or LO ( ) to adjust the
volume. Put the case back into the pouch, arrow-side first. The speaker
holes should face up.
3. Put on your dinosaur head and wiggle or shake your head to ROAR!
4. To turn on the dinosaur feet, follow the same instructions as for
the head, but move the switches on the cases to ON ( ).
5. Put on your dinosaur feet and STOMP! Now go and make someone
giggle. Have fun!
When you've finished, take off the dinosaur head and feet. Turn the
switches on the battery cases to OFF ( ). If you forget, the batteries
will turn themselves off after a few minutes.
TROUBLESHOOTING
Are you having trouble with your Roaring Dinosaur?
• If your dinosaur head won't make sounds, make sure the switch is in the
LO ( ) or HI ( ) position or try installing new LR44 button batteries.
• If your dinosaur feet won't make sounds, make sure the switches are in
the ON ( ) position or try installing new LR44 button batteries.
• To save battery power, make sure you turn off the head and feet when
you've finished playing with them.
If you've tried these steps and are still having trouble...
• I n the U.S., go to cranium.com/support or call 1-877-CRANIUM
• O utside the U.S., go to cranium.com/worldwidesupport
We value your input and we'll do our best to help!
USeng01KC
Welcome to Cranium
For even more fun, visit cranium.com!
Roaring
Dinosaur
Giggle Gear
®
™
Need help?
Do you have a question about the Roaring Dinosaur and is the answer not in the manual?
Questions and answers