Cranium Magical Unicorn Instructions

GET STARTED

1. To turn on the unicorn head, open the pouch in the snout and remove
the battery case. Do not disconnect the wires.
2. Move the switch on the case to HI
the case back into the pouch, arrow-side first. The speaker holes should face up.
3. Put on your unicorn head and wiggle or shake your head to NEIGH!
4. To turn on the unicorn hooves, follow the same instructions as for the
head, but move the switches on the cases to ON
5. Put on your unicorn hooves and TROT! Now go and make someone giggle.
Have fun!
When you've finished, take off the unicorn head and hooves. Turn the switches
on the battery cases to OFF
themselves off after a few minutes.

TROUBLESHOOTING

Are you having trouble with your Magical Unicorn?
• If your unicorn head won't make sounds, make sure the switch is in the
LO ( ) or HI ( ) position or try installing new LR44 button batteries.
• If your unicorn hooves won't make sounds, make sure the switches are in
the ON ( ) position or try installing new LR44 button batteries.
• To save battery power, make sure you turn off the head and hooves when
you've finished playing with them.
If you've tried these steps and are still having trouble...
• In the U.S., go to cranium.com/support or call 1-877-CRANIUM
• Outside the U.S., go to cranium.com/worldwidesupport
We value your input and we'll do our best to help!
USeng01KC
Welcome to Cranium
( )
. If you forget, the batteries will turn
For even more fun, visit cranium.com!
Magical
Unicorn
( ) ( )
or LO to adjust the volume. Put
( )
Giggle Gear
®
.
™