Operation - Vax VRS24B User Manual

-

Operation

Assembling your vacuum cleaner
IMPORTANT: Always remove the power plug from the electrical outlet before assembling or removing accessories.
Firmly push the back panel
onto the base assembly.
Line up here
Insert the bottom of the dirt
container to align with the tab
on the upper cover of the
motor. To secure the dirt
container, push the top in
place, there will be an audible
click when it is secure.
4
Ensure it is fully located
before inserting the two
short screws.
Align the tabs on the
lower hose/inspection
tube with the slots on the
hose.
This vacuum cleaner is equipped with a convenient cord storage feature. The
power cord winds around the two cord holders at the side of the unit. The bottom
cord holder has a quick release feature. Turn the cord hook to the left or the right
to remove the power cord.
Slide the handle into
place onto the top of the
back panel.
Push and turn the hose
clockwise until secure.
Secure the top handle to
the back panel by inserting
the two long screws.
Wrap the hose round and
through the hose clip and
then down and insert into
hose connector.