Make Power Supply Cord Connection - Whirlpool W10435040B Installation Instructions Manual

Undercounter dishwasher
Hide thumbs Also See for W10435040B:
Table of Contents

Advertisement

Using 2 or more people, grasp sides of dishwasher door frame
and place dishwasher on its back.
Using a flat-blade screwdriver, turn the plastic fasteners ¹⁄₄ turn to
unlock them. Remove panel. Do not remove tech sheet from
access panel.
Using a ¹⁄₄" hex head socket, nut driver or Torx
remove terminal box cover. Retain for later use.
12
Install a UL Listed/CSA Approved strain relief. Make sure screw
heads are facing to the left when tightening conduit nut. Strain
relief is provided with the power supply cord kit.
NOTE: If using Option B, proceed to "Determine Cabinet
Opening," to continue with the installation of your dishwasher.

Make Power Supply Cord Connection

Option A, Power Supply Cord:
®
T20
®
screwdriver,
Route cord so that it does not touch dishwasher motor to lower
part of dishwasher tub. Pull cord through strain relief in terminal
box.

Advertisement

Table of Contents
loading

Table of Contents