Configure Wep - D-Link DWR-712 User Manual

Section 4 - Connecting to a Wireless Network
It is recommended to enable WEP on your wireless router or access point before configuring your wireless adapter. If you are joining an existing
network, you will need to know the WEP key being used.
1. Open the Windows
XP Wireless U tilit y by r ight- click ing
®
o n t h e w i r e l e s s c o m p u t e r i c o n i n y o u r s y s t e m t r a y
(lower-right corner of screen). Select View Available Wireless Networks.
2. Highlight the wireless network (SSID) you would like to connect to
and click Connect.
D-Link DWR-712 User Manual

Configure WEP

71