D-Link DWR-712 User Manual page 30

Section 3 - Configuration
If you choose WEP, the following options will appear:
Authentication:
WEP Encryption:
Default WEP Key:
WEP Key:
If you choose WPA-Personal, the following options will appear:
WPA Mode:
Cipher Type:
Network Key:
D-Link DWR-712 User Manual
Select whether to use Open or Shared authentication.
Select whether to use 64-bit or 128-bit encryption.
Select which WEP key (1-4) to use as the default key. This will
also change the WEP Key text box to that WEP key for your to
configure(1-4).
Set the WEP key/password for your wireless network. Based
on whether you are using 64 or 128-bit encryption, and
whether you are using a HEX or ASCII key, you will need to
enter different numbers of characters for your key, as indicated
below the WEP Key text box. ASCII keys may use letters and
numbers only, and HEX keys may use numbers 0-9 and letters
A-F only.
Select whether to use WPA2 only or WPA only. WPA2 only is
the most secure, provided that all of your clients can support
it.
Select whether to use the TKIP or AES cipher. The AES cipher
is the most secure, provided that all of your clients can support
it.
Enter the key/password you want to use for your wireless
network. The key must be 8 to 63 characters long, and may
only contain letters and numbers.
26