Advertisement
V-033_Rapide_Comp_U_G.qxd
5. Usage
IMPORTANT: Do not use the Carpet Cleaner as a
dry vacuum.
NOTE: Never leave unit unattended with power
on. Turn OFF when emptying and filling reservoir.
DO NOT oversaturate carpet or upholstery.
IMPORTANT: For best cleaning results, use
steady, moderate, forward and backward motion.
CHECK FOR COLOUR FASTNESS:
Before cleaning carpet/upholstery, test for colour
fastness. Dampen a white cloth with solution. Test a
small area somewhere discreet i.e. underneath a
cushion. Gently rub the cloth over the area. Check
each colour for colour bleeding. If the cloth remains
clean, it should be safe to clean the
carpet/upholstery.
HELPFUL HINTS FOR CLEANING CARPET:
1. Do not oversaturate carpet with cleaning solution
while using the Carpet Cleaner.
2. For heavily soiled areas, additional applications
may be necessary.
3. Allow plenty of time to dry carpet thoroughly.
4. Wipe cleaning solution from woodwork and wood
to prevent any damage.
5. Try not to walk on carpet until it is completely dry.
6. After carpet is thoroughly dry, vacuum the carpet
using a cleaner with a revolving brushroll.
Carpet and upholstery Cleaning
Fig.5/1
Plug cord into electrical outlet.
30/6/06
8:46 am
Page 6
Fig.5/2
Turn ON/OFF switch to the "ON" position.
Fig.5/3
Hold the tool approximately 1" above the stained
surface. Press the solution dispense trigger to apply
cleaning solution to the stained area. NOTE: Before
using hand tool attachments, it is necessary to
prime the pump. Follow these steps for optimal
performance:
• Fill the clean water tank.
• Place hand tool attachment on floor.
• Depress the solution dispense button on hose for
10 seconds while the power is off.
• Repeat if necessary.
Fig.5/4
Gently scrub the stained area with the brush on the tool
until the stain is completely removed. Release the
solution dispense trigger and continue moving the tool
over cleaned area to remove as much liquid as possible.
Usage
5
Advertisement
