Advertisement
V-033_Rapide_Comp_U_G.qxd
Preparing the Machine/Attachments
Fig.3/3a
Unscrew cap and fill Clean Water Tank with solution
up to the Soap Fill Line (Diagram 3/3). Fill the rest of
the Clean Water Tank with warm tap water (MAX 40
up to the Water Fill Line (Diagram 3/3a).
Fig.3/4
Replace Clean Water Tank cap and tighten firmly.
Return Clean Water Tank to cleaner (Diagram 3/4).
Close lid making sure that the Lid Release Latch
clicks into place (Diagram 3/4a).
Fig.3/4a
4
30/6/06
8:46 am
Page 5
4. Attachments
NOTE: Always turn off appliance before
connecting or disconnecting attachments.
Connecting Attachments
)
0
c
Fig.4/1
Connect desired attachment by pressing tool onto
the end of the attachment hose until the locking
button snaps into the hole. WARNING: Keep spray
pointed away from face. Failure to do so may result
in personal injury.
Fig.4/2
To remove, press down on the locking button and pull
the tool away from the hose.
Advertisement
