JVC D-ILA DLA-RS55 Firmware Update Manual page 4

3. Projector Software Update
The software is accepted when the projector in STAND-BY Mode.
For example DLA-X70R
(1) Click "Start" on PC →Select "ILA-FPJ X70R" from "ALL programs"
This will start the ILA-FPJ Updater.
Press [Update Firmware]
(2) The software update will start. Please wait until it is finished.
The STANDBY indicator display lights Orange when starting the update. Then the three LEDs will light up.
Note:
Set IP Address to projector's IP address if required.
If a Windows Firewall warning message
appears, please select "Unblock".
Caution:
Do not unplug the cable while
the update is in progress.
The first part of the update (Main Firmware)
will proceed quickly.
The second part of the update (Sub Firmware)
will proceed very slowly.
The entire update process will take over
10 minutes. Please continue to wait.
Close Up LEDs