Recalling Preset Stations; Software Version; Fm Range Setting - Sangean H201 User Manual

Recalling preset stations

. Press the Power button to turn on the radio.
2. Select the required waveband by pressing the Band button.
3. Momentarily press the required Preset button, the preset number
and station frequency will appear in the display.

Software version

The software display cannot be altered and is just for your refer-
ence.
. Turn off the radio.
2. Press the Preset button 3/step button for 2 seconds until the
software version number (e.g. P0) shown on the display.

FM range setting

3. After the display of software version, the display will automatically
change to FM range setting. Press the Tuning up/down button to
choose the desired selection and press the Preset button 3/step
button to confirm the setting. Options for FM range are as following:
F00: 87.5-108 MHz
F01: 76-90 MHz
F02: 64-108 MHz
F03: 76-108 MHz
GB
9